This machine has been babied all of its life. As a portable machine, this one has been left in a covered truck. Airlock seals have been changed every 6 months (more than necessary) and it comes with an extra set. 100′ of Mark II hose may be negotiable.
Located in DesMoines, Iowa. Sold as is.
A used Krendl 250 cellulose through blower insulation machine. Runs great. Contact Craig at 419-230-3552. Located in the Toledo, Ohio area.
**this machine is sold as is
This through-blower machine works well. It comes with approximately 80 ft. of hose and 100 ft. of remote cord. It runs well just has rust.
Asking $800.
Contact Craig at 419-230-3552. Located in the Toledo, Ohio area.
Nearly $30,000 worth of equipment for ONLY $11,995!!
 | Used Krendl 2000 System Complete for Wall Spray, Open Blows, Retrofit Dense Pack, and Commercial Spray, Metal Buildings, Fireproofing, Soundproofing and Thermal Applications – New and Existing Structures! System will blow Cellulose, Fiberglass, Rock Wool, ANY fiber insulation – Wet or Dry! Value $9,100 |
 | Like NEW Krendl 500 The compact Krendl 500H is an all-fiber (airlock) insulation machine that offers reduced weight and electrical requirements. With increased portability and many options available including shredder and double blower, the Krendl 500 H is a great choice for the small professional contractor who wants to use all insulation fibers with all applications (open blow or spray-on). Value $5,500 |
 | GV180 Gas Vacuum 18HP Known for durability and high production, the Krendl GV180 vacuum is designed with a steel fan and chamber, powered by a rugged Briggs and Stratton 18HP V-Twin gas engine. This vacuum is intended for removing all types of blown insulation and for recycling wet spray. Value $3,500 |
 | Water tank & Hoses (not pictured) Value $300 |
 | Wet Wall Spray Accessories 2 – Krendl pumps 1 – Wall Scrubber 1 – Hose reel for spray hose Nearly $5,000 value! |
 | Generac 15000 Watt Generator 30 HP Generac. 120/240V. Will run both machines above at the same time! $2,699 value! |
If you want a small blower to insulate infrequently, then this is a great option! This Krendl blower works fine and the blower fan shows no wear. The machine has some surface rust on the bottom. External bearings are easily greased and maintained.
ONLY use this machine for cellulose. Rockwool and fiberglass will destroy the blower.
Located in Brighton, Michigan
Purchased in March of 2009, this Krendl 2300 has only 20.7 hours on the machine! Located in Salt Lake City, Utah. This machine has one 240 v output. A hopper extension was added.
Comes with 200’ for hose and connectors.
Valued at $9,900 new.
2001 Freightliner, 215 h.p. Mercedes engine, automatic transmission, twin 45 gallon tanks, approx. 170k miles on engine, 24 ft. x 8 ft. x 8 ft. box (non-CDL)with side loading door. Translucent roof for daylight lighting.
Machine has a little over 1,400 hrs. on machine. Vac-u-lock and airlock have ‘new’ seals. We will install ‘new’ PTO belts and blower belts.
We would go over machine to be certain everything was job-site ready (turn-key), and offer 90 day warranty on the machine and water tank system. (No warranty on truck, but truck is in great condition. I believe there are some extras with this truck (extra pump and second wall scrubber). This system, alone, ran well over $70,000 (not including the truck!)
Let us help you flip your insulation blowing machine! The Cool Machine brand is so popular that it is difficult to find them used. We always have people inquiring about used machines. Are you in need of upgrading from a CM1500 to a CM2400? Or, perhaps you already have a CM2400 and want to upgrade to a larger airlock. We can help you determine the fair market value of your machine and market it to help you move it fast.
Contact Barry at 810-614-0072 or barry@insulationmachines.net for more information.
This Krendl 500 is in great shape. It was purchased in 2008 or 2009 and has not been used for almost a year.
The machine is maintained very well. Pictures below show that the unit is free of rust and the electrical box is dust free.
Along with the machine is a Generaic 15,000 watt generator. It is the same age as the machine. With 15KW, you have way more than enough power to power this machine.
Some details include:
Deal directly with the owner!
Contact Gary at: 207 947 0044
Truck: 2005 Isuzu, 6.0 L. Vortec engine (gas). 18 ft. box 96″H. X 96″ W., 74,000 miles. Rear spotlights on box for night-time work and clean-up.
Includes: machine (CM-3500 w/ Vac-pack, and built–in 17.5 KW generator (2 yrs. old). 300 ft. of 3″ hose. 150 ft. of pressure line for wall spray.(2) wireless remotes, (2) wall scrubbers, (2) wall spray nozzles, 200 ft. power line for ‘grid’ power hook-up at job-site, power transfer panel to switch from generator to line power (requires 240 volt, 50 amps, single phase). Under-Body tool boxes for equipment storage. Water pump for wall spray and internal wetting system. (No water storage tank).
Own this for as little as $1,150 a month! (call for details)
We currently have three machines with ONLY approximately 300 hours on each machine.
The Fiberiffic handles all blowing materials. Used for loose-fill, wall spray and fireproofing. Everything from residential to commercial.
Priced for a fast sale at $7,000.00 firm or may be interested in full or partial trades
Here is what you get!
Machine Location: Brighton, Michigan
Owner: Greg Plank, (734) 693-3960
As always, Insulation Machines or Barry Pendley does not make claims about this equipment. This sale would be “as is” and money transactions will be only between you and the owner of this equipment.
Everything in the photos is for sale…machine, hoses, ladders, truck etc.
Machine details:
Truck details:
Deal with the owner. Contact Bob Watson: 214-620-7791 cell
Located in Roanoke, TX
If you are into saving thousands of dollars on equipment that has never been used, then this is a great buy!
While the trailer has hauled a few things, the CM2400 insulation blower has never been used and is only a few months old.
Details on CM2400
Deal directly with the owner. We make no commission on this machine. We are helping a customer. Asking $12,500.
Harry Johnson, Taylorville, IL
217-820-2137
hejohnson@yahoo.com
Located in:
Accu1 9600 Bought in 2/2011 has worked great for me. Powerful machine, just rebuilt all works perfect. Brand new wireless remote, new battery, 838 hours total on machine. $6000
Deal directly with the owner. Contact Kyle Mueller at 631-265-4870 or email: kyle@triplehcontracting.com
Located on Long Island, New York
Used CM2400s are not common. This blower and truck are listed for fast movement at
$18,800
Deal directly with the owner. We make no claims about used equipment and let the owners inform prospective buyers. You will also pay the owner directly.
Contact: David Lambert and Associates LLC
Dlambert249@netscape.net
317-294-7544
Insulizer HV: $9,500
Has a pressure pump built-in for wall spray or using an internal wetting system.
Less than 300 hours of use.
Note: you will see an additive hopper for inserting a cementitous material on the photos. We can remove this module at no cost if you wish.
Fiberglass: 900 lbs. per hour
Cellulose : 1500 lbs. per hour
Size & Weight
66″ long x 48″ Depth x 58″ high — 770 Lbs.
Options:
This is a low hours, complete Meyer Series 1400 fiberglass, Rockwool and cellulose insulation blowing machine.
…everything needed to install in a truck to make it operational. Includes a new Chelsea PTO drive for an Allison automatic transmission, also has the original PTO for a manual transmission also with low hours. Also has the hydraulic pump that connects directly to either PTO drive, has the Hydraulic tank and hoses that mount to the frame of the truck and the fluid cooler is also included. Everything works like new and is in excellent shape. The entire set-up only has 716 hours and will last for 10’s of thousands of hours. Everything included would cost well over $40,000 if purchased new today. This equipment will produce $thousands$ in income per month for 15 to 20 years. 100% ready to install and get to work. Please call or text for more info or set-up a time to inspect the equipment. I purchased all of this 4 years ago with the idea of starting a 3rd business and I just don’t have time to do so. My loss is your gain.
Work Directly with the Owner, Bruce. Watch the video and complete the form below to contact Bruce.
ARVE Error: Mode: lazyload is invalid or not supported. Note that you will need the Pro Addon for lazyload modes.
Located in Loxley, Alabama, minutes from I-10
Call the owner and deal directly with Andy at 251-752-0113
Are you looking to get into the insulation business or expand your existing one? Here is a trailer package that is ready for work. The generous-sized trailer will hold a ton of material and have plenty of room for the following equipment: